HomeAbout
PortfolioBlogCareersContact Us
Illustration of injection molding cost in India: material, mold and part costs estimated against a map of India

Injection Molding Cost in India

Indicative mold, material and part costs, and how to budget an injection molding project before you start.

What an injection molded part costs depends on four things: the material, the mold, the part design and the volume. This guide gives indicative figures for each, shows how the mold cost spreads over production volume, and explains how to keep the total down.

About these figures: They are indicative ranges for budgeting, not a quotation. Polymer prices move with crude oil and global supply, so share your drawing for an accurate estimate.

1. What Determines the Cost

Material

Material is paid for by the kilogram, so the grade and the part weight both matter. Indicative prices:

MaterialTypeTypical range (₹/kg)Recent range (₹/kg)*
PPCommodity₹90 to ₹130₹150 to ₹180
HDPECommodity₹95 to ₹140₹140 to ₹175
ABSEngineering₹160 to ₹220₹200 to ₹280
PA6Engineering₹200 to ₹300₹250 to ₹350
PA66 GFEngineering₹280 to ₹400₹350 to ₹500
PCEngineering₹250 to ₹350₹300 to ₹400
POMEngineering₹220 to ₹320₹260 to ₹360

*Recent prices reflect supply disruptions during 2025 and 2026. Always confirm current rates.

Engineering plastics cost more but last longer and perform better. Choose the material for the job, not the price per kilo; our plastic materials guide can help.

The mold

The mold is a one-time cost, and usually the biggest single investment in a project. Indicative ranges:

Mold typeTypical costLead time
Simple, single cavity₹2 lakh to ₹8 lakh4 to 6 weeks
Medium complexity, multi-cavity₹8 lakh to ₹15 lakh6 to 8 weeks
Complex: hot runner, slides, precision₹15 lakh to ₹30 lakh or more8 to 12 weeks

The price depends on the number of cavities, the runner and cooling design, the part geometry and the tolerances. Tooling in India typically costs considerably less than equivalent tooling from Europe or the USA.

Part design

Complex parts cost more to tool and to mold. The features that add most:

Volume

The more parts you make, the less each one carries of the mold cost and setup. Indicative figures for a simple 10 to 15 g PP part:

Annual volumeApproximate cost per part
1,000 to 5,000₹15 to ₹50
10,000 to 50,000₹5 to ₹20
1,00,000 and above₹1 to ₹10

2. Budget Summary

ItemTypical range
Mold₹2 lakh to ₹30 lakh or more
Simple PP part, high volume₹2 to ₹8 per piece
Engineering part, low volume₹25 to ₹60 or more per piece
DFM and prototyping, where needed₹20,000 to ₹2 lakh
Assembly and packing₹0.50 to ₹5 per part

The final price depends on your design, tolerances and volumes. Send us your drawing for an accurate estimate.

3. Tool Cost vs Part Cost

A mold price can look high on its own, but it is spread over every part the mold makes. Take this example:

The mold adds ₹5,00,000 ÷ 5,00,000 = ₹1 per part, so the effective cost is ₹5 + ₹1 = ₹6 per part. As volume grows, the mold's share keeps falling:

Total productionMold cost per partProduction costEffective cost per part
5,00,000₹1.00₹5.00₹6.00
10,00,000₹0.50₹5.00₹5.50
20,00,000₹0.25₹5.00₹5.25

This is why molding is most economical at volume. For a few hundred parts, CNC machining or 3D printing may cost less.

4. How to Lower the Cost

Our guide on reducing plastic part cost goes into each of these in more detail.

5. Example: A Smart Meter Casing

Because we designed this 12-part smart meter casing for a client as well as molding it, the fit between its parts, the PCB and the terminal block was settled before any steel was cut. The tool was right first time and the unit cost stayed stable as volumes grew. It has now been produced in volumes above 100,000 units. Read the case study →

Frequently Asked Questions

How much does injection molding cost in India?

As a rough guide, molds cost from about ₹2 lakh to ₹30 lakh or more, and parts from about ₹1 to ₹60 or more each, depending on material, complexity and volume.

Why do quotes vary so much?

Material, mold complexity, number of cavities, tolerances and volume all change the price. Two quotes are only comparable if they assume the same mold and process.

How can I reduce the cost?

Get a DFM review before tooling, keep walls thin and uniform, choose the right material and use multi-cavity molds for high volumes.

Have a project in mind?

Share your drawing for a quick cost estimate and DFM review. We respond within a business day.