Project Overview
Smart meters are being installed across India at a scale few plastic parts ever see, and every meter needs a casing that protects the electronics, fits its internal components precisely, and comes out the same on every shot. Prismatech designed this smart meter casing for a client, built the tooling in our toolroom, and took it into volume production. It has now been produced in quantities above 100,000 units.
A Rare 12-Part Design
The casing is made up of 12 molded parts. Few smart meter designs use this many, and every one of those parts has to fit the others exactly, shot after shot, for the meter to assemble without rework.
A Hidden Optical Washer
An SS403 steel optical washer is insert molded on the inside of the casing. Because SS403 is magnetic, the magnetic optical probe used to read the meter still holds and works, while the washer itself stays out of sight on the outside.
An Adjustable Terminal Cover
The terminal cover has a gear-type provision, so it can be set at different angles while cables are being fixed in the terminal block, and the installer does not have to hold it out of the way.
Built to International Standards
The casing is made according to international standards and allows for varying fixing dimensions on the wall, so the same meter can be mounted across different installations.
What a Smart Meter Casing Has to Do
A meter casing looks like a simple box, but it carries more requirements than most parts its size. Every smart meter casing has to:
- Hold the PCB and terminal block in the same position every time, so each meter assembles without rework
- Close reliably between base and cover, with provision for tamper-evident sealing
- Keep the display clearly visible
- Stay dimensionally consistent from the first part to the hundred-thousandth, across every cavity
How We Designed It for Production
Because we designed the casing as well as molding it, we could build manufacturability in from the first drawing instead of fixing problems after the tool was made.
Design for Manufacturability
The design was reviewed for draft, wall thickness, gate position and fit between all 12 parts before any steel was cut, so the tools could be built right the first time.
In-House Tooling
The molds were designed and built in our own toolroom, which kept every tooling decision and correction under one roof, including the insert molding of the steel washer. They are made in Stavax ESR steel, hardened and tempered to 50 to 52 HRC, which gives each mold a life of one million shots with ease.
Controlled Production
Process parameters were fixed after sampling trials and held through production, with inspection at each stage under our ISO 9001:2015 quality system.
Production Outcome
- ✓ Designed, tooled and produced by Prismatech for a client
- ✓ 12 parts, with an SS403 optical washer insert molded inside
- ✓ Gear-type terminal cover that sets at different angles for cabling
- ✓ Molds in Stavax ESR steel, hardened and tempered to 50 to 52 HRC, good for one million shots
- ✓ More than 100,000 casings produced
- ✓ In ongoing volume production
Why It Matters
Handling both the design and the tool means problems are solved at the drawing stage, where they cost least, instead of on the shop floor.
It also means a smart meter manufacturer can come to one partner for the casing, the molds and volume supply, rather than coordinating three.
Have a Similar Casing Requirement?
Share your drawing or specification and our team will respond with how Prismatech can support your project, along with a quotation.
Contact Us
