What an injection molded part costs depends on four things: the material, the mold, the part design and the volume. This guide gives indicative figures for each, shows how the mold cost spreads over production volume, and explains how to keep the total down.
1. What Determines the Cost
Material
Material is paid for by the kilogram, so the grade and the part weight both matter. Indicative prices:
| Material | Type | Typical range (₹/kg) | Recent range (₹/kg)* |
|---|---|---|---|
| PP | Commodity | ₹90 to ₹130 | ₹150 to ₹180 |
| HDPE | Commodity | ₹95 to ₹140 | ₹140 to ₹175 |
| ABS | Engineering | ₹160 to ₹220 | ₹200 to ₹280 |
| PA6 | Engineering | ₹200 to ₹300 | ₹250 to ₹350 |
| PA66 GF | Engineering | ₹280 to ₹400 | ₹350 to ₹500 |
| PC | Engineering | ₹250 to ₹350 | ₹300 to ₹400 |
| POM | Engineering | ₹220 to ₹320 | ₹260 to ₹360 |
*Recent prices reflect supply disruptions during 2025 and 2026. Always confirm current rates.
Engineering plastics cost more but last longer and perform better. Choose the material for the job, not the price per kilo; our plastic materials guide can help.
The mold
The mold is a one-time cost, and usually the biggest single investment in a project. Indicative ranges:
| Mold type | Typical cost | Lead time |
|---|---|---|
| Simple, single cavity | ₹2 lakh to ₹8 lakh | 4 to 6 weeks |
| Medium complexity, multi-cavity | ₹8 lakh to ₹15 lakh | 6 to 8 weeks |
| Complex: hot runner, slides, precision | ₹15 lakh to ₹30 lakh or more | 8 to 12 weeks |
The price depends on the number of cavities, the runner and cooling design, the part geometry and the tolerances. Tooling in India typically costs considerably less than equivalent tooling from Europe or the USA.
Part design
Complex parts cost more to tool and to mold. The features that add most:
- Very thin walls: Walls under about 0.5 mm need faster machines and more precise tooling.
- Tight tolerances: Holding ±0.02 mm instead of ±0.1 mm needs more precise mold making, better steel, tighter process control and more inspection.
- Undercuts: Each slide or lifter adds roughly ₹1 lakh to ₹3 lakh to the mold.
- Surface finish: Mirror polish, texturing or hidden gates all add to mold cost.
Volume
The more parts you make, the less each one carries of the mold cost and setup. Indicative figures for a simple 10 to 15 g PP part:
| Annual volume | Approximate cost per part |
|---|---|
| 1,000 to 5,000 | ₹15 to ₹50 |
| 10,000 to 50,000 | ₹5 to ₹20 |
| 1,00,000 and above | ₹1 to ₹10 |
2. Budget Summary
| Item | Typical range |
|---|---|
| Mold | ₹2 lakh to ₹30 lakh or more |
| Simple PP part, high volume | ₹2 to ₹8 per piece |
| Engineering part, low volume | ₹25 to ₹60 or more per piece |
| DFM and prototyping, where needed | ₹20,000 to ₹2 lakh |
| Assembly and packing | ₹0.50 to ₹5 per part |
The final price depends on your design, tolerances and volumes. Send us your drawing for an accurate estimate.
3. Tool Cost vs Part Cost
A mold price can look high on its own, but it is spread over every part the mold makes. Take this example:
- Material: PP
- Annual volume: 5,00,000 parts
- Mold: 8 cavities, ₹5 lakh
- Production cost: ₹5 per part
The mold adds ₹5,00,000 ÷ 5,00,000 = ₹1 per part, so the effective cost is ₹5 + ₹1 = ₹6 per part. As volume grows, the mold's share keeps falling:
| Total production | Mold cost per part | Production cost | Effective cost per part |
|---|---|---|---|
| 5,00,000 | ₹1.00 | ₹5.00 | ₹6.00 |
| 10,00,000 | ₹0.50 | ₹5.00 | ₹5.50 |
| 20,00,000 | ₹0.25 | ₹5.00 | ₹5.25 |
This is why molding is most economical at volume. For a few hundred parts, CNC machining or 3D printing may cost less.
4. How to Lower the Cost
- Thin and even walls: Less material and a shorter cycle.
- Multi-cavity molds: A higher mold price, but a much lower cost per part at volume.
- The right material: Do not pay for nylon where PP does the job.
- A DFM review before tooling: Simplifying the design at this stage can take a significant share off the mold cost.
Our guide on reducing plastic part cost goes into each of these in more detail.
5. Example: A Smart Meter Casing
Because we designed this 12-part smart meter casing for a client as well as molding it, the fit between its parts, the PCB and the terminal block was settled before any steel was cut. The tool was right first time and the unit cost stayed stable as volumes grew. It has now been produced in volumes above 100,000 units. Read the case study →
Frequently Asked Questions
How much does injection molding cost in India?
As a rough guide, molds cost from about ₹2 lakh to ₹30 lakh or more, and parts from about ₹1 to ₹60 or more each, depending on material, complexity and volume.
Why do quotes vary so much?
Material, mold complexity, number of cavities, tolerances and volume all change the price. Two quotes are only comparable if they assume the same mold and process.
How can I reduce the cost?
Get a DFM review before tooling, keep walls thin and uniform, choose the right material and use multi-cavity molds for high volumes.

